How to Press DTF Transfers

How to Press DTF Transfers

Not sure how to apply your DTF transfers? Don’t worry — we’ve got you. Follow this quick step-by-step guide to get perfect, long-lasting results every time.

Recommended Press Settings

  • Temperature: 275–285°F
  • Time: 10–12 seconds (for cotton); 8–10 seconds (for polyester)
  • Pressure: Medium to firm (we recommend higher pressure for best results)
  • Peel: Hot peel (peel immediately after pressing)

Optional Finish Press: For a smoother feel and added durability, press again for 3–5 seconds with a protective sheet (like parchment or a Teflon sheet).

Step-by-Step Instructions

  1. Pre-press your garment for 3–5 seconds to remove moisture and wrinkles.
  2. Position your DTF transfer on the garment — design side up, carrier side on top.
  3. Press using the settings above (275–285°F, 10–12 sec, medium-high pressure).
  4. Peel hot immediately after pressing — don’t wait!
  5. Finish press (optional): For a softer feel and extra durability, cover with a parchment sheet and press for another 3–5 seconds.

Helpful Tips

  • Always test press on new fabric types before full production.
  • If your design lifts while peeling, your press may be too cool or pressure too light — adjust and try again.
  • Use parchment paper or a Teflon sheet during the finish press to avoid shine.

Need Help?

Still unsure or having issues? Contact us here or email Sales@FatDadCD.com. We're happy to help!

Shop DTF Transfers →